Car Tyre.jpg
    Chassis’
    Home
    Motors
     Wheels & Tyres
        Other Accessories
Gears
Betta Spur Gears -
Manufactured from one piece ali, bronze, using the best in Swiss machinery to give guaranteed accuracy. available in 33, 34, 35, 36, 37, 38, 39 & 40 teeth - all are to 15mm diameter enabling inter-changeability and are made to fit a
3/32” dia axle  £5.00 each

Betta Spur Gears & Pinions -
Betta Pro Spur Gears, same as above but with 1/8” dia boss. Solder on type.
The lightest spur gear currently available   £5.00 each

Betta Pinions made specially to mesh with Betta Spur Gears
64 DP with 8, 9, 10 & 11 teeth   £5.00 each

6 & 7 tooth pinion to suit the above gears with 2mm hole £5.00 each

Fass Pinions with 8, 9, 10 & 11 teeth 64 DP £5.00 each

Voki/Ilpe Spur Gears - made from glass reinforced nylon for angle motor set-ups available with 36, 37, 38, 39 & 40 teeth, made to mesh with Betta or Fass pinions and to fit a 3/32” axle £3.90 each

64 DP Contrate Gears, Glass reinforced with 30, 31, or 32 teeth £3.90 each

As above but with a 15mm o/d dia, 3/32” bore. 64 DP
Available with 36 & 37 teeth £4.50 each

Voki/Ilpe Gears made from glass reinforced nylon 80 DP pitch 3/32” bore - available with 45, 50 & 51 teeth £3.90 each

Voki/Ilpe Pinions for 80 DP pitch crowns.
Available with 11, 12, 13 & 14 teeth. £6.00 each

Parma Plastic Gear 38th with a 3/32 dia bore. £3.00 each

Red Fox Plastic Gear - Blue, Green or Orange. £3.95 each
&
Gears
Over 50 Years
of Model Car Racing Supply
Betta
Classic
2 Hartley Crescent · Birkdale · Southport
Merseyside · PR8 4SG · United Kingdom
Tel/Ansa: +44 (0) 1704 563707 - 24 hr Answerphone Service
E-mail: sales@bettaandclassic.com
Gears
Betta Spur Gears -
Manufactured from one piece ali, bronze, using the best in Swiss machinery to give guaranteed accuracy. available in 33, 34, 35, 36, 37, 38, 39 & 40 teeth - all are to 15mm diameter enabling inter-changeability and are made to fit a
3/32” dia axle  £5.00 each

Betta Spur Gears & Pinions -
Betta Pro Spur Gears, same as above but with 1/8” dia boss. Solder on type.
The lightest spur gear currently available   £5.00 each

Betta Pinions made specially to mesh with Betta Spur Gears
64 DP with 8, 9, 10 & 11 teeth   £5.00 each

6 & 7 tooth pinion to suit the above gears with 2mm hole £5.00 each

Fass Pinions with 8, 9, 10 & 11 teeth 64 DP £5.00 each

Voki/Ilpe Spur Gears - made from glass reinforced nylon for angle motor set-ups available with 36, 37, 38, 39 & 40 teeth, made to mesh with Betta or Fass pinions and to fit a 3/32” axle £3.90 each

64 DP Contrate Gears, Glass reinforced with 30, 31, or 32 teeth £3.90 each

As above but with a 15mm o/d dia, 3/32” bore. 64 DP
Available with 36 & 37 teeth £4.50 each

Voki/Ilpe Gears made from glass reinforced nylon 80 DP pitch 3/32” bore - available with 45, 50 & 51 teeth £3.90 each

Voki/Ilpe Pinions for 80 DP pitch crowns.
Available with 11, 12, 13 & 14 teeth. £5.00 each

Parma Plastic Gear 38th with a 3/32 dia bore. £3.00 each

Red Fox Plastic Gear - Blue, Green or Orange. £3.95 each
Lights Trans.tif
PICT0186.JPG